FP200abesco.com Website FP200 FR

FP200 FR Expanding Foam Website – www.FP200abesco.com

You can also go to our product specific site for more information on our FP200!

 

Abesco FP200 FR Expanding Foam is a single pack Fire Rated polyurethane expanding foam, and is designed to prevent the spread of fire and smoke from one compartment to another through gaps and voids through fire rated walls or floors.

Why use FP200 FR Expanding Foam

  • Extremely versatile solution
  • CFC free
  • Excellent fill capabilities
  • Very easy to install and finish
  • Excellent smoke and draft seal capabilities
  • Sound dampening properties
  • Paintable and stainable
  • Easily trimmed after curing
  • Excellent adhesion to most building substrates
  • Unaffected by moisture or humidity when cured
  • Cures to provide a strong semi-regid seal

Where do I use FP200 FR Expanding Foam

Abesco FP200 FR Expanding Foam is suitable for use in most buildings where a seal is required for through penetrations in fire rated floors and walls.

Typical types of buildings FP200 FR Expanding Foam is commonly used are:

  • Hotels
  • Condominiums
  • Office and Commercial buildings
  • Hospitals
  • Industrial buildings etc

What happens in a fire situation

Under fire conditions Abesco FP200 FR Expanding Foam provides an effective insulating barrier, thereby maintaining the integrity of the wall or floor and preventing the spread of fire from one compartment to another.

Ordering information

Code
Desc
Case Qty
Pallet Qty
Color
Size
20424
24oz FP200 FR Expanding Foam Can
12
12
Pink
24 oz.
20410
10oz FP200 FR Expanding Foam Can
12
12
Pink
10oz.

Technical Information

Application Temperature: Min 41F (5C) Surface
68-77F (20C-25C) Can
Can must be inverted for dispensing
Flammable during dispensing
Tack free time: 5-10 mins*
Cure time: 20-25 mins 1.5″ Dia (38mm)*
Hardening time: 1.5 – 2 hrs*
Foam when cured has around 60% closed cell content
Specific gravity: 22-26 kg/m3
Water absorption: max 1% volume
Temp. resistance: -40F to 194F (-40C to 90C)
Tensile strength: 0,071 – 0,076 MPa
Elongation at break: 15 – 20%
Free expansion: 120%

* depending on temperature and humidity

 

Testing and Perfomance

Abesco FP200 FR Expanding Foam has been tested in various countries in accordance with the methodology and criteria described in:

  • ASTM E814 / UL 1479 (1 & 2 Hr)
  • ASTM E-84 (Flame 10, Smoke 35)
  • ASTM E-662
  • ASTM E-162
  • BS 476- 20 (up to 4 Hr)
  • EN 1366-3 (up to 4 Hr)