Call Us: 407.851.3300

FP200 FR Expanding Foam

Abesco FP200 FR Expanding Foam is a single pack Fire Rated polyurethane expanding foam, and is designed to prevent the spread of fire and smoke from one compartment to another through gaps and voids through fire rated walls or floors.

Made to fill gaps, small openings, and crevices in and around fire rated walls and floors, the Abesco® FP200 uses polyurethane expanding foam which prohibits fire and smoke from spreading.

Aside from great fire protection, the Abesco fire rated foam offers an impressive insulation seal when working with wood, brick, aluminum, concrete, and steel.

One 24oz. (1) can covers approximately one (1) cubic Foot area.

  • Extremely versatile solution
  • CFC free
  • Excellent fill capabilities
  • Very easy to install and finish
  • Excellent smoke and draft seal capabilities
  • Sound dampening properties
  • Paintable and stainable
  • Easily trimmed after curing
  • Excellent adhesion to most building substrates
  • Unaffected by moisture or humidity when cured
  • Cures to provide a strong semi-regid seal
Abesco FP200 FR Expanding Foam is suitable for use in most buildings where a seal is required for through penetrations in fire rated floors and walls.

Typical types of buildings FP200 FR Expanding Foam is commonly used are:

  • Hotels
  • Condominiums
  • Office and Commercial buildings
  • Hospitals
  • Industrial buildings etc
Abesco FP200 FR Expanding Foam has been tested in various countries in accordance with the methodology and criteria described in:

  • ASTM E814 / UL 1479 (1 & 2 Hr)
  • ASTM E-84 (Flame 10, Smoke 35)
  • ASTM E-662
  • ASTM E-162
  • BS 476- 20 (up to 4 Hr)
  • EN 1366-3 (up to 4 Hr)

Case Qty
Pallet Qty
24oz FP200 FR Expanding Foam Can
24 oz.
10oz FP200 FR Expanding Foam Can
10 oz.
  • Application Temperature: Min 41F (5C) Surface 68-77F (20C-25C)
    Can must be inverted for dispensing Flammable during dispensing
  • Tack free time: 5-10 mins*
  • Cure time: 20-25 mins 1.5″ Dia (38mm)*
  • Hardening time: 1.5 – 2 hrs*
    Foam when cured has around 60% closed cell content
  • Specific gravity: 22-26 kg/m3
  • Water absorption: max 1% volume
  • Temp. resistance: -40F to 194F (-40C to 90C)
  • Tensile strength: 0,071 – 0,076 MPa
  • Elongation at break: 15 – 20%
  • Free expansion: 120%

* depending on temperature and humidity

  • Flame and smoke index: 10 & 35, Class A rating
  • Flammability class: B1 according to DIN4102 part 1
  • Storage: 50F to 68F (10C to 20C)
    Higher and lower temperatures can shorten storage life. Must be stored in vertical position (upright)
  • VOC: 186.1 g/L in can, less than 2 g/L cured (10+ days)
  • STC: 38
  • Dielectric Constant (relative static permittivity) 1.2 R: 7/inch (2.54 cm)

Download PDF Download PDF

Firestop Technical Support

Complete our contact form if you have any questions regarding our products or installation. We can advise on product use and recommended installation methods and have a full catalog of Technical Data Sheets for our full range of products.

Contact Us

  • Phone: 407.851.3300
  • Toll Free: 888.FIRESTP
  • Fax: 407.851.3388
  • Email:
Our UK website: twitter facebook