FP200 FR Expanding Foam
FP200 – Code #20424, 24 oz can
FP200 – Code #20410, 10 oz can
FP200 FR Expanding Foam is a single pack Fire Rated polyurethane expanding foam.
ASTM E814 / UL 1479 (1 & 2 Hr)
Our FP200 is designed and tested to prevent the spread of fire and smoke from one compartment to another through gaps and voids through fire rated walls or floors.
FP200 direct application of a controlled fire. This non-flammability is what takes the Abesco FP200 above non-rated expanding foams. Under fire conditions Abesco FP200 FR Expanding Foam provides an effective insulating barrier, thereby maintaining the integrity of the wall or floor and preventing the spread of fire from one compartment to another.
FP200 FR Expanding Foam from Abesco has been tested in various countries in accordance with the methodology and criteria described in:
- ASTM E814 / UL 1479 (1 & 2 Hr)
- ASTM E-84 (Flame 10, Smoke 35)
- ASTM E-662
- ASTM E-162
- BS 476- 20 (up to 4 Hr)
- EN 1366-3 (up to 4 Hr)
Abesco FP200 FR Expanding Foam has excellent adhesion properties to most common building surfaces and when cured provides a strong semi-rigid fire rated seal. Once fully expanded and cured, Abesco FP200 FR Expanding Foam is unaffected by moisture and does not degrade in high humidity conditions. Abesco FP200 FR Expanding Foam is an extremely versatile product and as such is well suited for use in a wide range of other applications.
FP200 Technical Information:
Application Temperature: Min 41F (5C) Surface
68-77F (20C-25C) Can
Can must be inverted for dispensing
Flammable during dispensing
Tack free time: 5-10 mins*
Cure time: 20-25 mins 1.5″ Dia (38mm)*
Hardening time: 1.5 – 2 hrs*
Foam when cured has around 60% closed cell content
Specific gravity: 22-26 kg/m3
Water absorption: max 1% volume
Temp. resistance: -40F to 194F (-40C to 90C)
Tensile strength: 0,071 – 0,076 MPa
Elongation at break: 15 – 20%
Free expansion: 120%
Flame and smoke index: 10 & 35, Class A rating
Flammability class: B1 according to DIN4102 part 1
Storage: 9 months-1 year, 5F to 68F (10C to 20C)
Higher temperatures can shorten storage life. Must be stored in vertical position (upright)
VOC: 2% per Council Directive 1999/13/EC 23.6g/l
STC: 38
Dielectric Constant (relative static permittivity) 1.2 R: 7/inch (2.54 cm)
* depending on temperature and humidity
FP200 From Abesco:
- Extremely versatile solution
- CFC free
- Excellent fill capabilities
- Very easy to install and finish
- Excellent smoke and draft seal capabilities
- Sound dampening properties
- Paintable and stainable
- Easily trimmed after curing
- Excellent adhesion to most building substrates
- Unaffected by moisture or humidity when cured
- Cures to provide a strong semi-regid seal
Abesco Fire LLC
Unit 325
9561 Satellite Blvd.
Orlando
FL 32837
Tel: 407 851 3300
Fax: 407 851 3388
